For a free quote or if you have any questions please click here.
 

Waltco Liftgates

DEL nationally distributes liftgates from industry leading manufacturer Waltco. Waltco offers the industry’s most extensive selection of liftgates, with more than 50 standard models ranging in capacity from 1,250 to 6,600 lbs. Most of our liftgates fall into one of eight categories, providing delivery solutions for trailers, straight truck, stake body, cube trucks and walk-in delivery vans.

Flipaway liftgates for trucks are welded to the frame of the vehicle chassis. The loading platform is designed with two or three folding sections. In the stored or travel position, the platform is folded and stored beneath the body floor, allowing access to the cargo area without activating the lift.

CS.jpgEMTC_outlined.jpgHLF.jpg

Brochures

C Series: 1600lbs – 2500lbs
EM Series: 2500lbs-3300lbs
EM/TC Series: 2500lbs-3300lbs
HLF Series: 2,500 lbs – 5000 lbs

Rail type lift gates for trucks have vertical tracks that weld to the rear frame of a pickup truck, service body, stake body, truck body or dry-freight trailers, and refrigerated trailers. The platform travels in these tracks via cables or chains in conjunction with a hydraulic cylinder, or the use of two hydraulic cylinders directly attached to the platform. In the travel position, the platform stores over the rear door, though an option is available for some models to allow storage below the door.

MDL_wht-hr-1.jpgDS_wht-hr-1.jpgPTN_wht-hr-1.jpg

Brochures

PTN Series: 1250 lbs – 1600 lbs
SB Series: 1250 lbs – 1600 lbs
DS Series: 1600 lbs – 3000 lbs
DT Series: 1600 lbs – 3000 lbs
MDL Series: 1250 lbs – 3000 lbs
MDL/HP Series : 1600 lbs – 3000 lbs

Rail type lift gates for trucks have vertical tracks that weld to the rear frame of a pickup truck, service body, stake body, truck body or dry-freight trailers, and refrigerated trailers. The platform travels in these tracks via cables or chains in conjunction with a hydraulic cylinder, or the use of two hydraulic cylinders directly attached to the platform. In the travel position, the platform stores over the rear door, though an option is available for some models to allow storage below the door.

RGL_wht-hr-1.jpgWDV_wht-hr-1.jpg

Brochures

RGL Series: 2000 lbs – 6000 lbs
WDV Series: 3500lbs – 6600 lbs

The Rail-Type Liftgates for trucks - Bottled Gas applications have vertical tracks that weld to the rear frame of a pick-up truck, service body, stake body, truck body, or trailer. The Bottle Gas Liftgates feature steel retention rails that automatically open to the operating position as the liftgate platform opens. The rails automatically fold back down again when the liftgate is returned to the stored position. Platform material is standard with steel diamond floor tread plate with optional aluminum, galvanized steel, expanded metal, or bar grating.

mdlbg.pngptbg-(1).pngrbgl.png

Brochures

MDLBG Series: 1600 lbs – 2000 lbs
PTBG Series: 1600 lbs
RBGL Series: 3000 lbs – 4000 lbs
WDVBG Series: 3500 lbs – 4500 lbs
 

Slider liftgates for trucks typically bolt to mounting brackets that are welded to the trailer cross-member and are compatible with either roll-up or swing-type doors. The platform slides in and out from underneath the vehicle on stationary tracks. The gate stores completely under the vehicle, does not add to overall vehicle length and is not susceptible to impact damage at loading docks.

GT_wht-hr.jpgwz.png

Brochures

GT Series: 3300 lbs – 4400 lbs
WZ Series: 4400 lbs – 5500 lbs

The tilting platform of a Level Lift liftgate keeps your load level, even on hills. These liftgates are welded to the frame of the vehicle chassis. The platform closes in an upright position against the rear door of the vehicle. As an option, the platform can double as the vehicle’s rear door, providing a weathertight seal.

bz.png

Brochure

BZ Series: 3300 lbs – 4400 lbs

Side loader liftgates for trucks are mounted below the side door of a truck body or trailer and can be either frame or body mounted, depending on the application. In the stored or travel position, the platform stores under the body and is either unfolded or extended out from under the door.

gtsl.pngsg.png

Brochure

GTSL Series– 3300lbs – 4400lbs
SG Series - 2000lbs  
News and Announcements
More News
New Strategic Partnership Gin-Cor
New Strategic Partnership Gin-Cor
DEL Equipment and Gin-Cor Industries announced today they have entered into a strategic partners ...
Salt/Sand Spreaders: Auger vs Chain
Salt/Sand Spreaders: Auger vs Chain
Feature,benefits, cons of auger and chain driven spreaders
Future Growth.Our Commitment.
Future Growth.Our Commitment.
Toronto, Ontario, (December 22, 2016) – DEL Equipment Limited (“DEL ...
SL505
DEL Toronto
Copyright © 2014 DEL Equipment Limited
Send us Feedback Policies & Disclaimer | Website by Inorbital